CN8 / NC8 - 2025 71 CN8 / NC8 - 2025 - EN 73

CN8 / NC8 - 2025 - EN

 I-Way To Customs

CHAPTER 72
IRON AND STEEL

I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM    
72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms    
Non-alloy pig iron containing by weight 0,5 % or less of phosphorus    
Containing by weight not less than 0,4 % of manganese    
Containing by weight 1 % or less of silicon 7201 10 11  
Containing by weight more than 1 % of silicon 7201 10 19  
Containing by weight not less than 0,1 % but less than 0,4 % of manganese 7201 10 30  
Containing by weight less than 0,1 % of manganese 7201 10 90  
Non-alloy pig iron containing by weight more than 0,5 % of phosphorus 7201 20 00  
Alloy pig iron; spiegeleisen    
Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium 7201 50 10  
Other 7201 50 90  
72.02 Ferro-alloys    
Ferro-manganese    
Containing by weight more than 2 % of carbon    
With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 % 7202 11 20  
Other 7202 11 80  
Other 7202 19 00  
Ferro-silicon    
Containing by weight more than 55 % of silicon 7202 21 00  
Other    
Containing by weight 4 % or more but not more than 10 % of magnesium 7202 29 10  
Other 7202 29 90  
Ferro-silico-manganese 7202 30 00  
Ferro-chromium    
Containing by weight more than 4 % of carbon    
Containing by weight more than 4 % but not more than 6 % of carbon 7202 41 10  
Containing by weight more than 6 % of carbon 7202 41 90  
Other    
Containing by weight not more than 0,05 % of carbon 7202 49 10  
Containing by weight more than 0,05 % but not more than 0,5 % of carbon 7202 49 50  
Containing by weight more than 0,5 % but not more than 4 % of carbon 7202 49 90  
Ferro-silico-chromium 7202 50 00  
Ferro-nickel 7202 60 00  
Ferro-molybdenum 7202 70 00  
Ferro-tungsten and ferro-silico-tungsten 7202 80 00  
Other    
Ferro-titanium and ferro-silico-titanium 7202 91 00  
Ferro-vanadium 7202 92 00  
Ferro-niobium 7202 93 00  
Other    
Ferro-phosphorus 7202 99 10  
Ferro-silico-magnesium 7202 99 30  
Other 7202 99 80  
72.03 Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms    
Ferrous products obtained by direct reduction of iron ore 7203 10 00  
Other 7203 90 00  
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel    
Waste and scrap of cast iron 7204 10 00  
Waste and scrap of alloy steel    
Of stainless steel    
Containing by weight 8 % or more of nickel 7204 21 10  
Other 7204 21 90  
Other 7204 29 00  
Waste and scrap of tinned iron or steel 7204 30 00  
Other waste and scrap    
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles    
Turnings, shavings, chips, milling waste, sawdust and filings 7204 41 10  
Trimmings and stampings    
In bundles 7204 41 91  
Other 7204 41 99  
Other    
Fragmentised (shredded) 7204 49 10  
Other    
In bundles 7204 49 30  
Other 7204 49 90  
Remelting scrap ingots 7204 50 00  
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel    
Granules 7205 10 00  
Powders    
Of alloy steel 7205 21 00  
Other 7205 29 00  
II. IRON AND NON-ALLOY STEEL    
72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)    
Ingots 7206 10 00  
Other 7206 90 00  
72.07 Semi-finished products of iron or non-alloy steel    
Containing by weight less than 0,25 % of carbon    
Of rectangular (including square) cross-section, the width measuring less than twice the thickness    
Rolled or obtained by continuous casting    
Of free-cutting steel 7207 11 11  
Other    
Of a thickness not exceeding 130 mm 7207 11 14  
Of a thickness exceeding 130 mm 7207 11 16  
Forged 7207 11 90  
Other, of rectangular (other than square) cross-section    
Rolled or obtained by continuous casting 7207 12 10  
Forged 7207 12 90  
Other    
Of circular or polygonal cross-section    
Rolled or obtained by continuous casting 7207 19 12  
Forged 7207 19 19  
Other 7207 19 80  
Containing by weight 0,25 % or more of carbon    
Of rectangular (including square) cross-section, the width measuring less than twice the thickness    
Rolled or obtained by continuous casting    
Of free-cutting steel 7207 20 11  
Other, containing by weight    
0,25 % or more but less than 0,6 % of carbon 7207 20 15  
0,6 % or more of carbon 7207 20 17  
Forged 7207 20 19  
Other, of rectangular (other than square) cross-section    
Rolled or obtained by continuous casting 7207 20 32  
Forged 7207 20 39  
Of circular or polygonal cross-section    
Rolled or obtained by continuous casting 7207 20 52  
Forged 7207 20 59  
Other 7207 20 80  
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated    
In coils, not further worked than hot-rolled, with patterns in relief 7208 10 00  
Other, in coils, not further worked than hot-rolled, pickled    
Of a thickness of 4,75 mm or more 7208 25 00  
Of a thickness of 3 mm or more but less than 4,75 mm 7208 26 00  
Of a thickness of less than 3 mm 7208 27 00  
Other, in coils, not further worked than hot-rolled    
Of a thickness exceeding 10 mm 7208 36 00  
Of a thickness of 4,75 mm or more but not exceeding 10 mm 7208 37 00  
Of a thickness of 3 mm or more but less than 4,75 mm 7208 38 00  
Of a thickness of less than 3 mm 7208 39 00  
Not in coils, not further worked than hot-rolled, with patterns in relief 7208 40 00  
Other, not in coils, not further worked than hot-rolled    
Of a thickness exceeding 10 mm    
Of a thickness exceeding 15 mm 7208 51 20  
Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of    
2050 mm or more 7208 51 91  
Less than 2050 mm 7208 51 98  
Of a thickness of 4,75 mm or more but not exceeding 10 mm    
Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm 7208 52 10  
Other, of a width of    
2050 mm or more 7208 52 91  
Less than 2050 mm 7208 52 99  
Of a thickness of 3 mm or more but less than 4,75 mm    
Rolled on four faces or in a closed box pass, of a width not exceeding 1250 mm and of a thickness of 4 mm or more 7208 53 10  
Other 7208 53 90  
Of a thickness of less than 3 mm 7208 54 00  
Other    
Perforated 7208 90 20  
Other 7208 90 80  
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated    
In coils, not further worked than cold-rolled (cold-reduced)    
Of a thickness of 3 mm or more 7209 15 00  
Of a thickness exceeding 1 mm but less than 3 mm    
‘Electrical’ 7209 16 10  
Other 7209 16 90  
Of a thickness of 0,5 mm or more but not exceeding 1 mm    
‘Electrical’ 7209 17 10  
Other 7209 17 90  
Of a thickness of less than 0,5 mm    
‘Electrical’ 7209 18 10  
Other    
Of a thickness of 0,35 mm or more but less than 0,5 mm 7209 18 91  
Of a thickness of less than 0,35 mm 7209 18 99  
Not in coils, not further worked than cold-rolled (cold-reduced)    
Of a thickness of 3 mm or more 7209 25 00  
Of a thickness exceeding 1 mm but less than 3 mm    
‘Electrical’ 7209 26 10  
Other 7209 26 90  
Of a thickness of 0,5 mm or more but not exceeding 1 mm    
‘Electrical’ 7209 27 10  
Other 7209 27 90  
Of a thickness of less than 0,5 mm    
‘Electrical’ 7209 28 10  
Other 7209 28 90  
Other    
Perforated 7209 90 20  
Other 7209 90 80  
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated    
Plated or coated with tin    
Of a thickness of 0,5 mm or more 7210 11 00  
Of a thickness of less than 0,5 mm    
Tinplate 7210 12 20  
Other 7210 12 80  
Plated or coated with lead, including terne-plate 7210 20 00  
Electrolytically plated or coated with zinc 7210 30 00  
Otherwise plated or coated with zinc    
Corrugated 7210 41 00  
Other 7210 49 00  
Plated or coated with chromium oxides or with chromium and chromium oxides 7210 50 00  
Plated or coated with aluminium    
Plated or coated with aluminium-zinc alloys 7210 61 00  
Other 7210 69 00  
Painted, varnished or coated with plastics    
Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished 7210 70 10  
Other 7210 70 80  
Other    
Clad 7210 90 30  
Tinned and printed 7210 90 40  
Other 7210 90 80  
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated    
Not further worked than hot-rolled    
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief 7211 13 00  
Other, of a thickness of 4,75 mm or more 7211 14 00  
Other 7211 19 00  
Not further worked than cold-rolled (cold-reduced)    
Containing by weight less than 0,25 % of carbon    
‘Electrical’ 7211 23 20  
Other    
Of a thickness of 0,35 mm or more 7211 23 30  
Of a thickness of less than 0,35 mm 7211 23 80  
Other 7211 29 00  
Other    
Perforated 7211 90 20  
Other 7211 90 80  
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated    
Plated or coated with tin    
Tinplate, not further worked than surface-treated 7212 10 10  
Other 7212 10 90  
Electrolytically plated or coated with zinc 7212 20 00  
Otherwise plated or coated with zinc 7212 30 00  
Painted, varnished or coated with plastics    
Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished 7212 40 20  
Other 7212 40 80  
Otherwise plated or coated    
Plated or coated with chromium oxides or with chromium and chromium oxides 7212 50 20  
Plated or coated with chromium or nickel 7212 50 30  
Plated or coated with copper 7212 50 40  
Plated or coated with aluminium    
Plated or coated with aluminium-zinc alloys 7212 50 61  
Other 7212 50 69  
Other 7212 50 90  
Clad 7212 60 00  
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel    
Containing indentations, ribs, grooves or other deformations produced during the rolling process 7213 10 00  
Other, of free-cutting steel 7213 20 00  
Other    
Of circular cross-section measuring less than 14 mm in diameter    
Of a type used for concrete reinforcement 7213 91 10  
Of a type used for tyre cord 7213 91 20  
Other    
Containing by weight 0,06 % or less of carbon 7213 91 41  
Containing by weight more than 0,06 % but less than 0,25 % of carbon 7213 91 49  
Containing by weight 0,25 % or more but not more than 0,75 % of carbon 7213 91 70  
Containing by weight more than 0,75 % of carbon 7213 91 90  
Other    
Containing by weight less than 0,25 % of carbon 7213 99 10  
Containing by weight 0,25 % or more of carbon 7213 99 90  
72.14 Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling    
Forged 7214 10 00  
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling 7214 20 00  
Other, of free-cutting steel 7214 30 00  
Other    
Of rectangular (other than square) cross-section    
Containing by weight less than 0,25 % of carbon 7214 91 10  
Containing by weight 0,25 % or more of carbon 7214 91 90  
Other    
Containing by weight less than 0,25 % of carbon    
Of a type used for concrete reinforcement 7214 99 10  
Other, of circular cross-section measuring in diameter    
80 mm or more 7214 99 31  
Less than 80 mm 7214 99 39  
Other 7214 99 50  
Containing by weight 0,25 % or more of carbon    
Of a circular cross-section measuring in diameter    
80 mm or more 7214 99 71  
Less than 80 mm 7214 99 79  
Other 7214 99 95  
72.15 Other bars and rods of iron or non-alloy steel    
Of free-cutting steel, not further worked than cold-formed or cold-finished 7215 10 00  
Other, not further worked than cold-formed or cold-finished    
Containing by weight less than 0,25 % of carbon    
Of rectangular (other than square) cross-section 7215 50 11  
Other 7215 50 19  
Containing by weight 0,25 % or more of carbon 7215 50 80  
Other 7215 90 00  
72.16 Angles, shapes and sections of iron or non-alloy steel    
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm 7216 10 00  
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm    
L sections 7216 21 00  
T sections 7216 22 00  
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more    
U sections    
Of a height of 80 mm or more but not exceeding 220 mm 7216 31 10  
Of a height exceeding 220 mm 7216 31 90  
I sections    
Of a height of 80 mm or more but not exceeding 220 mm    
With parallel flange faces 7216 32 11  
Other 7216 32 19  
Of a height exceeding 220 mm    
With parallel flange faces 7216 32 91  
Other 7216 32 99  
H sections    
Of a height of 80 mm or more but not exceeding 180 mm 7216 33 10  
Of a height exceeding 180 mm 7216 33 90  
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more    
L sections 7216 40 10  
T sections 7216 40 90  
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded    
With a cross-section which is capable of being enclosed in a square the side of which is 80 mm 7216 50 10  
Other    
Bulb flats 7216 50 91  
Other 7216 50 99  
Angles, shapes and sections, not further worked than cold-formed or cold-finished    
Obtained from flat-rolled products    
C, L, U, Z, omega or open-ended sections 7216 61 10  
Other 7216 61 90  
Other 7216 69 00  
Other    
Cold-formed or cold-finished from flat-rolled products    
Profiled (ribbed) sheets 7216 91 10  
Other 7216 91 80  
Other 7216 99 00  
72.17 Wire of iron or non-alloy steel    
Not plated or coated, whether or not polished    
Containing by weight less than 0,25 % of carbon    
With a maximum cross-sectional dimension of less than 0,8 mm 7217 10 10  
With a maximum cross-sectional dimension of 0,8 mm or more    
Containing indentations, ribs, grooves or other deformations produced during the rolling process 7217 10 31  
Other 7217 10 39  
Containing by weight 0,25 % or more but less than 0,6 % of carbon 7217 10 50  
Containing by weight 0,6 % or more of carbon 7217 10 90  
Plated or coated with zinc    
Containing by weight less than 0,25 % of carbon    
With a maximum cross-sectional dimension of less than 0,8 mm 7217 20 10  
With a maximum cross-sectional dimension of 0,8 mm or more 7217 20 30  
Containing by weight 0,25 % or more but less than 0,6 % of carbon 7217 20 50  
Containing by weight 0,6 % or more of carbon 7217 20 90  
Plated or coated with other base metals    
Containing by weight less than 0,25 % of carbon    
Copper-coated 7217 30 41  
Other 7217 30 49  
Containing by weight 0,25 % or more but less than 0,6 % of carbon 7217 30 50  
Containing by weight 0,6 % or more of carbon 7217 30 90  
Other    
Containing by weight less than 0,25 % of carbon 7217 90 20  
Containing by weight 0,25 % or more but less than 0,6 % of carbon 7217 90 50  
Containing by weight 0,6 % or more of carbon 7217 90 90  
III. STAINLESS STEEL    
72.18 Stainless steel in ingots or other primary forms; semi-finished products of stainless steel    
Ingots and other primary forms 7218 10 00  
Other    
Of rectangular (other than square) cross-section    
Containing by weight 2,5 % or more of nickel 7218 91 10  
Containing by weight less than 2,5 % of nickel 7218 91 80  
Other    
Of square cross-section    
Rolled or obtained by continous casting 7218 99 11  
Forged 7218 99 19  
Other    
Rolled or obtained by continuous casting 7218 99 20  
Forged 7218 99 80  
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more    
Not further worked than hot-rolled, in coils    
Of a thickness exceeding 10 mm 7219 11 00  
Of a thickness of 4,75 mm or more but not exceeding 10 mm    
Containing by weight 2,5 % or more of nickel 7219 12 10  
Containing by weight less than 2,5 % of nickel 7219 12 90  
Of a thickness of 3 mm or more but less than 4,75 mm    
Containing by weight 2,5 % or more of nickel 7219 13 10  
Containing by weight less than 2,5 % of nickel 7219 13 90  
Of a thickness of less than 3 mm    
Containing by weight 2,5 % or more of nickel 7219 14 10  
Containing by weight less than 2,5 % of nickel 7219 14 90  
Not further worked than hot-rolled, not in coils    
Of a thickness exceeding 10 mm    
Containing by weight 2,5 % or more of nickel 7219 21 10  
Containing by weight less than 2,5 % of nickel 7219 21 90  
Of a thickness of 4,75 mm or more but not exceeding 10 mm    
Containing by weight 2,5 % or more of nickel 7219 22 10  
Containing by weight less than 2,5 % of nickel 7219 22 90  
Of a thickness of 3 mm or more but less than 4,75 mm 7219 23 00  
Of a thickness of less than 3 mm 7219 24 00  
Not further worked than cold-rolled (cold-reduced)    
Of a thickness of 4,75 mm or more 7219 31 00  
Of a thickness of 3 mm or more but less than 4,75 mm    
Containing by weight 2,5 % or more of nickel 7219 32 10  
Containing by weight less than 2,5 % of nickel 7219 32 90  
Of a thickness exceeding 1 mm but less than 3 mm    
Containing by weight 2,5 % or more of nickel 7219 33 10  
Containing by weight less than 2,5 % of nickel 7219 33 90  
Of a thickness of 0,5 mm or more but not exceeding 1 mm    
Containing by weight 2,5 % or more of nickel 7219 34 10  
Containing by weight less than 2,5 % of nickel 7219 34 90  
Of a thickness of less than 0,5 mm    
Containing by weight 2,5 % or more of nickel 7219 35 10  
Containing by weight less than 2,5 % of nickel 7219 35 90  
Other    
Perforated 7219 90 20  
Other 7219 90 80  
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm    
Not further worked than hot-rolled    
Of a thickness of 4,75 mm or more 7220 11 00  
Of a thickness of less than 4,75 mm 7220 12 00  
Not further worked than cold-rolled (cold-reduced)    
Of a thickness of 3 mm or more, containing by weight    
2,5 % or more of nickel 7220 20 21  
Less than 2,5 % of nickel 7220 20 29  
Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight    
2,5 % or more of nickel 7220 20 41  
Less than 2,5 % of nickel 7220 20 49  
Of a thickness not exceeding 0,35 mm, containing by weight    
2,5 % or more of nickel 7220 20 81  
Less than 2,5 % of nickel 7220 20 89  
Other    
Perforated 7220 90 20  
Other 7220 90 80  
72.21 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel    
Containing by weight 2,5 % or more of nickel 7221 00 10  
Containing by weight less than 2,5 % of nickel 7221 00 90  
72.22 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel    
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded    
Of circular cross-section    
Of a diameter of 80 mm or more, containing by weight    
2,5 % or more of nickel 7222 11 11  
Less than 2,5 % of nickel 7222 11 19  
Of a diameter of less than 80 mm, containing by weight    
2,5 % or more of nickel 7222 11 81  
Less than 2,5 % of nickel 7222 11 89  
Other    
Containing by weight 2,5 % or more of nickel 7222 19 10  
Containing by weight less than 2,5 % of nickel 7222 19 90  
Bars and rods, not further worked than cold-formed or cold-finished    
Of circular cross-section    
Of a diameter of 80 mm or more, containing by weight    
2,5 % or more of nickel 7222 20 11  
Less than 2,5 % of nickel 7222 20 19  
Of a diameter of 25 mm or more, but less than 80 mm, containing by weight    
2,5 % or more of nickel 7222 20 21  
Less than 2,5 % of nickel 7222 20 29  
Of a diameter of less than 25 mm, containing by weight    
2,5 % or more of nickel 7222 20 31  
Less than 2,5 % of nickel 7222 20 39  
Other, containing by weight    
2,5 % or more of nickel 7222 20 81  
Less than 2,5 % of nickel 7222 20 89  
Other bars and rods    
Forged, containing by weight    
2,5 % or more of nickel 7222 30 51  
Less than 2,5 % of nickel 7222 30 91  
Other 7222 30 97  
Angles, shapes and sections    
Not further worked than hot-rolled, hot-drawn or extruded 7222 40 10  
Not further worked than cold-formed or cold-finished 7222 40 50  
Other 7222 40 90  
72.23 Wire of stainless steel    
Containing by weight 2,5 % or more of nickel    
Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium 7223 00 11  
Other 7223 00 19  
Containing by weight less than 2,5 % of nickel    
Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium 7223 00 91  
Other 7223 00 99  
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL    
72.24 Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel    
Ingots and other primary forms    
Of tool steel 7224 10 10  
Other 7224 10 90  
Other    
Of tool steel 7224 90 02  
Other    
Of rectangular (including square) cross-section    
Hot-rolled or obtained by continuous casting    
The width measuring less than twice the thickness    
Of high-speed steel 7224 90 03  
Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter 7224 90 05  
Other 7224 90 07  
Other 7224 90 14  
Forged 7224 90 18  
Other    
Hot-rolled or obtained by continuous casting    
Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum 7224 90 31  
Other 7224 90 38  
Forged 7224 90 90  
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more    
Of silicon-electrical steel    
Grain-oriented 7225 11 00  
Other    
Hot-rolled 7225 19 10  
Cold-rolled 7225 19 90  
Other, not further worked than hot-rolled, in coils    
Of tool steel 7225 30 10  
Of high-speed steel 7225 30 30  
Other 7225 30 90  
Other, not further worked than hot-rolled, not in coils    
Of tool steel 7225 40 12  
Of high-speed steel 7225 40 15  
Other    
Of a thickness exceeding 10 mm 7225 40 40  
Of a thickness of 4,75 mm or more but not exceeding 10 mm 7225 40 60  
Of a thickness of less than 4,75 mm 7225 40 90  
Other, not further worked than cold-rolled (cold-reduced)    
Of high-speed steel 7225 50 20  
Other 7225 50 80  
Other    
Electrolytically plated or coated with zinc 7225 91 00  
Otherwise plated or coated with zinc 7225 92 00  
Other 7225 99 00  
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm    
Of silicon-electrical steel    
Grain-oriented 7226 11 00  
Other    
Not further worked than hot-rolled 7226 19 10  
Other 7226 19 80  
Of high-speed steel 7226 20 00  
Other    
Not further worked than hot-rolled    
Of tool steel 7226 91 20  
Other    
Of a thickness of 4,75 mm or more 7226 91 91  
Of a thickness of less than 4,75 mm 7226 91 99  
Not further worked than cold-rolled (cold-reduced) 7226 92 00  
Other    
Electrolytically plated or coated with zinc 7226 99 10  
Otherwise plated or coated with zinc 7226 99 30  
Other 7226 99 70  
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel    
Of high-speed steel 7227 10 00  
Of silico-manganese steel 7227 20 00  
Other    
Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter 7227 90 10  
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum 7227 90 50  
Other 7227 90 95  
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel    
Bars and rods, of high-speed steel    
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad 7228 10 20  
Forged 7228 10 50  
Other 7228 10 90  
Bars and rods, of silico-manganese steel    
Of rectangular (other than square) cross-section, hot-rolled on four faces 7228 20 10  
Other    
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad 7228 20 91  
Other 7228 20 99  
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded    
Of tool steel 7228 30 20  
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum    
Of circular cross-section of a diameter of 80 mm or more 7228 30 41  
Other 7228 30 49  
Other    
Of circular cross-section, of a diameter of    
80 mm or more 7228 30 61  
Less than 80 mm 7228 30 69  
Of rectangular (other than square) cross-section, hot-rolled on four faces 7228 30 70  
Other 7228 30 89  
Other bars and rods, not further worked than forged    
Of tool steel 7228 40 10  
Other 7228 40 90  
Other bars and rods, not further worked than cold-formed or cold-finished    
Of tool steel 7228 50 20  
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum 7228 50 40  
Other    
Of circular cross-section, of a diameter of    
80 mm or more 7228 50 61  
Less than 80 mm 7228 50 69  
Other 7228 50 80  
Other bars and rods    
Of tool steel 7228 60 20  
Other 7228 60 80  
Angles, shapes and sections    
Not further worked than hot-rolled, hot-drawn or extruded 7228 70 10  
Other 7228 70 90  
Hollow drill bars and rods 7228 80 00  
72.29 Wire of other alloy steel    
Of silico-manganese steel 7229 20 00  
Other    
Of high-speed steel 7229 90 20  
Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum 7229 90 50  
Other 7229 90 90  


Copyright © Conex 2025 - All rights reserved.
Tous droits de reproduction réservés.